1287.Toreq 11.5 yard scraperHere are a few pictures of the 1150 Toreq. It has a 98" cut, 18.4 x26 rear and 16.5 x 16.1 front diamond tread tires. It uses the same dolly swivel, lift and gate cylinders as the 13 yard Toreq. The eject cylinder is a 4 x 62 with 2" ram. It's front gate will open wider than any of the competition ( 59" ). It has excellent ground clearance (17" at the cutting edge). Neck and draft arms and neck cross piece are all 1/2 inch thick steel. All hubs are welded steel instead of cast, and the wheels are reinforced. Notice the size of the gate arms on the Toreq scrapers.
As with all Toreq scrapers, the pins are hardened and replaceable, and all major pins go through bushings. The rear axles adjust independent of each other. This feature is critical if you ruin a tire and replace with a different brand or different height. With the adjustable axles you can level the cut of the scraper.
In one of the pictures you can see the ground clearance measured with a yard stick. It actually has a little more clearance than what the picture shows, because the scraper is resting on the transport pins.
Stacy or Doug.......................phone 660-548-3804
Grand River Sales LLC
Brunswick MO
